cuttolengthnotes
Table of Contents
Cut to length notes
keyence
v_kv_pro_ch03_5.pdf
page 14 mentions changing counter to 24 bit with memsw instruction for kv high speed count for encoder input set to 5 VDC with switch on side
count numbers
from test done with KV16DR and freq drive 2-24-11
1010 counts per rev of motor test of gearbox gave 50939
51532 50881 50554
1024*50 Ans = 51200 Ans/4 Ans = 12800 51200/2 Ans = 25600 50*1010 Ans = 5050
Memory Locations
| dm200 | major counts |
| dm201 | counts desired |
Utility Relays
KV_Programming_96M0366_UM_AS_5.pdf
section 1.3.8 utility relays
section 1.3.10 data memories
| 2002 | always ON |
| 2003 | always off |
| 2008 | on for first scan |
| 2009 | turns on when result of arithmetic is negative or overflow (<) |
| 2010 | turns on when result of arithmetic is zero (=) |
| 2011 | turns on when result of arithmetic is positive (>) |
| 2012 | turns on when result of arithmetic generates error |
basic_course_24.pdf
hmi
wants password when uploading program to computer password is stored in application on computer (not HMI)
cuttolengthnotes.txt · Last modified: 2011/02/25 19:28 by rfile